GENERAL OPERATING INSTRUCTIONS

1. Set the thermostat (comfort control) to a relative position. We suggest you set it at maximum until the pool starts to get too warm. This will keep the solar heating process going at maximum.

2. If the pool gets too warm, you can start to lower the thermostat until you find the setting you like best.  You will have to use your pool temperature gauge as a guide with the comfort control setting.

3. Place the AUTO / OFF / ON switch to AUTO for full automatic operation.

COOLING DOWN A HOT POOL

Turn the LX220 to ON [manual override] during evening hours when the sun has set.  Manually monitor temperature drop. During the daylight hours ensure the LX220 is OFF.

CLEANING, DRAINING & BACKWASHING

Ensure the pump is on and the valves set as previously used.