SECTION 1 - SYSTEM ARRIVAL
All PCS1 convection units are warranted to be free from defects in material and workmanship for a
period of thirty-six months from the date of shipment from the factory to the original factory
purchaser. This warranty covers all parts and labor to correct manufacturing defects, but does not
cover incidental fin damage nor any corrosive damage to heat transfer coils caused by improperly
maintained chemical Ph levels in pools. Ph levels outside of the 7.2 to 7.6 range voids warranty.
Use in salt-water pools voids warranty [pools filled with sea or ocean water].
Corrugated fins are used on the heat transfer coils for improved efficiency. They are waffled in
appearance and not straight. Fin bending that has been combed with a fin tool does not affect
performance and is not considered a manufacturing defect. Our obligation under this warranty is
limited to the repair or replacement, at our factory, of any part or parts which, upon our
examination, have proven to be defective. Correction of such defects by repair or replacement (at
our option) and return freight via lowest common carrier, shall constitute fulfillment of SolarAttic,
Inc.’s obligation to the purchaser.
This warranty does not apply to those products which, in our judgment, have been altered or
repaired outside our factory, or subjected to misuse, negligence, accident, corrosive atmospheres,
or operating beyond the limits of our design.
THIS WARRANTY CONSTITUTES THE BUYERS SOLE REMEDY. IT IS GIVEN IN LIEU OF ALL OTHER
WARRANTIES. THERE IS NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. WHERE CIRCUMSTANCES CAUSE REMEDY EXPRESSED HEREIN TO FAIL
OF ITS ESSENTIAL PURPOSE, SOLARATTIC, INC'S LIABILITY SHALL NOT IN ANY EVENT EXCEED
THE PURCHASE PRICE. IN NO EVENT, SHALL SOLARATTIC, INC BE LIABLE FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGES, WHETHER THE THEORY BE BREACH OF THIS OR ANY OTHER
WARRANTY, NEGLIGENCE, OR STRICTLY TORT. DISPUTES ARISING UNDER THIS AGREEMENT
SHALL BE GOVERNED BY APPLICABLE MINNESOTA LAW.
______________________________________________
DATE SHIPPED FROM FACTORY:
______________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
SECTION 1 - SYSTEM ARRIVAL
Thank you for your purchase!
This manual is the PCS1 installation, technical
support, and reference manual. It is not necessary that you read every page. Instead, you may
wish to read only those sections that you are concerned about. The material provided in this
manual is very detailed and is considered sufficient enough for the skilled or semi-skilled craftsman
to install the PCS1 system.
This manual provides a “dialog” and discussion of the issues involved in the technical
literature. The dialog covers areas that may not be readily apparent from the technical literature
itself [drawings, diagrams, etc.].
This “dialog” or discussion type of manual can be contrasted to a “step by step” manual
where all known installation factors are the same in every instance. In such a case, the installation
manual could then take you from step A to step Z -- one step at a time. Due to the unlimited
variations in swimming pools, their support systems, and the homes in which the PCS1 is installed
-- a “step by step” manual is not feasible. This manual, therefore, explains all of the technical
issues and provides the installer with a general installation process
to follow.
Having explained the technical issues, the installer must then apply the general installation
process to the specific pool and home involved. Do-it-yourselfers can install this product using
this manual if they have the appropriate skills involved. These are primarily electrical and PVC
plumbing skills. Again, since this is an “issues” and “dialog” manual, the do-it-yourselfer must
also be able to apply the knowledge provided to the actual installation site.
SECTION 1 - SYSTEM ARRIVAL
The following pages are CAUTION
NOTES THAT ARE designed to inform
you of the existence of hazardous areas.
These notes will help prevent personal
injury and fatalities. They will also help
prevent damage to this new equipment,
swimming pool systems or to the house.
!!!MAKE SURE YOU READ AND UNDERSTAND
ALL OF THESE CAUTION NOTES!!!
SHARP EDGES ON THE PCS1 CAN CAUSE CUTS OR INJURIES. THIS
IS NOT A PRODUCT THAT CHILDREN SHOULD BE ALLOWED TO TOUCH.
THEIR NATURAL CURIOSITY CAN RESULT IN INJURY OR ACCIDENT.
**KEEP ALL CHILDREN AWAY FROM THIS PRODUCT TO PREVENT CUTS,